<

Winsonic Military Product Standard


  Spec Standard
Shock Operating : 30g for 18ms, 300m/s2 MIL810F / IEC60068-2-27 for Vibration / ShockMethod 516.5, Procedure I
Vibration Operating : 1.6 g rms for XYZ/ 5-500 Hz MIL810F / IEC60068-2-27 for VibrationMethod 516.5, Procedure 1
Transit Drop   MIL-STD-810G 506.5 ( Package )
Humidity 95% @ 40 C MIL-STD-810G
Water-proof IP65 IEC 60598-1, Section 9 :2008
Dust-proof IP65 IEC 60598-1, Section 9 :2008
Salt Fog Resistant to Salt Fog MIL-STD-810G
Operating -20 to 60 C MIL-STD-810G 502.4
Storage Temperature -40 to 70 C MIL-STD-810G 502.4
Altitude - Operating 20K feet Operating MIL-STD-810G, Method 500.5 Procedure II :Operation, Air Cargo
Altitude - Storage 40K feet Non Operating MIL-STD-810G, Method 500.5 Procedure I :Storage, Air Transport
Thermal Shock   MIL-STD-883, Method 1011
EMI/EMC   MIL-STD 461E

MIL-STD-461E


REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT

MIL-STD-461E is approved for use by all United States Departments and Agencies of the Department of Defense

Standard(.pdf) Description
MIL-STD-461E Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment.
MIL-STD-462D Measurement of Radio Frequency Spectrum Characteristics, Superceded by MIL-STD-461E
MIL-STD-464 Electromagnetic Environmental Effects Requirements for Systems.
MIL-STD-469 Radar Engineering Interface Requirements, Electromagnetic Compatibility Metric
MIL-STD-1542B Electromagnetic Compatibility and Grounding Requirements for Space System Facilities

MIL-STD-461E - Emission and Susceptibility Requirements
Requirement Type of Test Description Frequency Range

CE101

Conducted Emissions Power Leads 30Hz - 10kHz

CE102

Conducted Emissions Power Leads 10kHz - 10MHz

CE106

Conducted Emissions Antenna Terminal 10kHz - 40GHz

CS101

Conducted Susceptibility Power Leads 30Hz - 150kHz

CS103

Conducted Susceptibility Antenna Port Intermodulation, 15kHz - 10GHz

CS104

Conducted Susceptibility Antenna Port Signal Rejection, 30Hz - 20GHz

CS105

Conducted Susceptibility Antenna Port Cross-modulation, 30Hz - 20GHz

CS109

Conducted Susceptibility Structure Current 60Hz - 100kHz

CS114

Conducted Susceptibility Bulk Cable Injection 10kHz - 400MHz

CS115

Conducted Susceptibility Ground - Bulk Cable Injection Impulse Excitation

CS116

Conducted Susceptibility Power & I/O Damped Sinusoid Transients, 10kHz - 100MHz

RE101

Radiated Emissions Magnetic Field 30Hz - 100kHz

RE102

Radiated Emissions Electric Field 10kHz - 18GHz

RE103

Radiated Emissions Antenna Spurious & Harmonic Outputs 10kHz - 40GHz

RS101

Radiated Susceptibility Magnetic Field 30Hz - 100kHz

RS103

Radiated Susceptibility Electric Field 10kHz - 40GHz
RS105 Radiated Susceptibility Transient Electromagnetic Field Pulsed EMI - EMP

Requirement Matrix
Equipment Surface Ships Submarines Aircraft, Army
CE101 A A A
CE102 A A A
CE106 L L L
CS101 A A A
CS103 S S S
CS104 S S S
CS105 S S S
CS109   L  
CS114 A A A
CS115   A  
CS116 A A L
RE101 A A A
RE102 A A A
RE103 L L L
RS101 A A A
RS103 A A A
RS105 L L L
Equipment Aircraft, Navy Aircraft, Air Force Space Systems
CE101 L    
CE102 A A A
CE106 L L L
CS101 A A A
CS103 S S S
CS104 S S S
CS105 S S S
CS109      
CS114 A A A
CS115 A A A
CS116 A A A
RE101 L    
RE102 A A A
RE103 L L L
RS101 L    
RS103 A A A
RS105 L    
Equipment Ground, Army Ground, Navy Ground, Air Force
CE101      
CE102 A A A
CE106 L L L
CS101 A A A
CS103 S S S
CS104 S S S
CS105 S S S
CS109      
CS114 A A A
CS115 L   L
CS116 L A A
RE101      
RE102 A A A
RE103 L L L
RS101 L L  
RS103 A A A
RS105   L  
A = Applicable L = Limited applicability S = Specified in procurement Blank = Not Applicable

MIL-STD-810G


MIL-STD 810G Method 507.5 Humidity Section 2.6.3 Procedure II
MIL-STD 810G Method 514.6, Operational vibration Annex C, 2.1 – Category 4
Longitudinal: 10-500Hz, 0.74g; Transverse: 10-500Hz, 0.20 g; Vertical: 10-500Hz, 1.04g; 1 hour/axis, 3 axis
MIL-STD 810G Section 2.2.2 Operational Shock, Procedure 1
Terminal peak sawtooth pulse, 40g, 11ms, 2 shocks/face, 6 faces
MIL-STD 810G Section 2.2.2 Non-Operational Shock, Procedure 5
Crash Haz Terminal Sawtooth pulse, 40g, 11ms, 2 shocks/face, 6 faces
IEC 60068-2-27 (Shock)
Sine Wave, 100g 11ms, 3 shocks/face, 6 repetitions
IEC 60068-2-32 (Drop)
6 faces, 2 drops/face
EN 61373 Random vibration, Category 1, class B
X: 5-20Hz, 0.0144 m/s², 20-150Hz -6dB/Oct, 0.70m/s², Y: 5-20Hz, 0.0060 m/s², 20-150Hz -6dB/Oct, 0.45m/s²,
Z: 5-20Hz, 0.0298 m/s², 20-150Hz -6dB/Oct, 1.0m/s², Rotated on vertical plane; operating; 10min/axis
EN 61373 Non-operational vibration, Category 1, class B
X: 5-20Hz, 0.461 m/s², 20-150Hz -6dB/Oct, 0.70m/s², Y: 5-20Hz, 0.192 m/s², 20-150Hz -6dB/Oct, 0.45m/s²,
Z: 5-20Hz, 0.968 m/s², 20-150Hz -6dB/Oct, 1.0m/s², Non-operating; 5 hours/axis
EN 61373 Non-operational shock
3 shocks/face,X:50m/s², 30ms; Y:30m/s²,30ms; Z:30m/s²,30ms